projects/lasers/100W Beaminator.md
... ...
@@ -53,9 +53,14 @@ We have limited the max power level in the system menu to 80% for this purpose.
53 53
| Acrylic | 4mm | 15mm/s | 40% | 1 | [^1] |
54 54
| Plywood | 3mm | 50mm/s | 40% | 1 | Lower speed/power is possible but leaves charred edges|
55 55
| Plywood | 6mm | 10mm/s | 40% | 1 | The edges are quite charred so might need some more experminatation (25mm/s 60% does not cut trough the wood completely so you need to break it of a bit)
56
-| hdf | 3mm | 50mm/s | 60% | 1 | Lower speed/power is possible but leaves charred edges|
56
+| hdf | 3mm | 40mm/s | 70% | 1 | Lower speed/power is possible but leaves charred edges|
57 57
| some random corrugated cardboard 3 layers | 6.3mm | 150mm/s | 40% | 1-2 | Always watch while lasering! **DON'T LOWER THE SPEED IT WILL BURN!** |
58 58
59
+### Engraving
60
+| Material | Strength | Speed | Power | Passes | Notes |
61
+| --------- | -------- | ------ | ----- | ------ | ----------- |
62
+
63
+
59 64
60 65
### LC Interlocking
61 66
Glueless tab settings for FreeCAD _Laser Cut Interlocking_ Workbench (based on 3mm Plywood)